Manipulation of pieces
Split, combine, rotate, flip pieces according to the specifics of the style. Adjust the direction of the grain line. Modeling of
trousers in the part for forming and separating a yoke at the waist line. Pattern
making of a yoke in the shoulder area for blouses and shirts. Transformation of
a two-piece jacket (front and back) into a jacket with one common side part.
Yoke at the waist line
Modeling of trousers in the part for forming and separating a yoke at the waist line.
Combine pieces
Waist shaped belt
Low waist
Front belt
Offset the waist line
Trace the pieces
Remove the spare parts from the front and the back piece
Manipulate the front dart
Shape the waist line with two digitized curve lines
Replace the lines
Back belt
Combine the pieces of the back belt
Shape the waist lineVerify the length of the sewn together lines
Rotate the belt
Flip the belt
Realign the grain line
Make the middle line of the belt a mirror line
Save the output pieces
Yoke in the shoulder area
Split front piece
Split the shoulder area of the front
Combine the shoulder area with the back piece
Separate the yoke from the back piece by split on digitized line
Jacket transformation
Transformation of a two-piece jacket (front and back) into a jacket with one common side part
Preliminary preparation of the pieces
Define the position of the seam between the back and the side piece with the function Split line
Measure the darts and side seam fit characteristics for fit on the waist and the hip line
Replace the side seam in the hip area with a horizontal straight line
Combine the front and back piece
Shape the seam between the back and the side piece
taking into account the same dart width and the side seam characteristics for fit on the hip line
Shape the seam between the front and the side piece
taking into account the side seam characteristics for fit on the hip line, dart width - equal to the side seam characteristics for fit on the waist line
Trace the pieces
by selecting the contour lines sequentially clockwise
Enter the name of the pieces
Create the notches for assembling the pieces
Save the output pieces
