Production patterns
Table of contents
1.1. Define the seam allowance amount
1.2. Regular corner
1.3. Turn back corner
1.4. Squared corner
1.5. Match squared corner
1.6. Create notches
2. Pattern making of auxiliary details [edit]
2.1. Facing
2.2. Interlining patterns (fusible)
4.1. Front piece lining
4.2. Back piece lining
4.3. Sleeves lining
Development of production patterns: seam allowance,
technological corners (regular, squared, turn back).
Pattern making of auxiliary details: facings, lining.
Examples: skirt lining, jacket lining.
Seam allowance [edit]
Define the seam allowance amount
Fold/ Close dart
- Include drill hole
- Include notches
- Include fold lines
Regular corner
Automatically set notches, Notch type: Extension, Notching line: Both
Turn back corner
Select the line to apply turn back corner
Squared corner
Select perimeter line before or after corner to square from
Match squared corner
Select point to create reference squared corner
Select perimeter line before or after corner to square from
Create notches
Pattern making of auxiliary details [edit]
Facing
Interlining patterns (fusible)
Ladies'skirt lining [edit]
Adjust the left back piece of the lining
Men's jacket lining [edit]
Front piece lining
Trace the front piece, draw auxiliary lines for the darts
Trace the piece
Replace perimeter lines
Rotate the dart by combining the pieces
Include the dart in the armhole
Enlarge the waist line
Shorten the side seam
Displace downward the shoulder line
Back piece lining
Displace downward the shoulder line, construct the fold in the back middle line, enlarge the waist line of the back and side piece,
adjust the length of the pieces
Sleeves lining
Enlarge the lining
Move smooth points
Adjust the length of the pieces
