Print

Auxiliary pieces for pockets

Table of contents

1. French pocket with two separate bags [edit]

1.1. Technical drawing of the unit

1.2. Input data of the style

1.3. Draw pocket opening

1.4. Draw pocket bags

1.5. Trace the pieces

1.6. Add seam allowance

1.7. Adjust the front piece

1.8. Complete the production patterns

2. French pocket with one piece bag [edit]

2.1. Technical drawing of the unit 2

2.2. Input data of the style 2

2.3. Draw pocket opening 2

2.4. Trace the pieces 2

2.5. Add seam allowance 2

2.6. Complete the production patterns 2

3. Welt pocket [edit]

3.1. Technical drawing of the unit 3

3.2. Input data of the style 3

3.3. Draw pocket bags 3

3.4. Trace the pieces 3

3.5. Complete the production patterns 3

Pattern making of auxiliary pieces for pockets according to the technology for sewing the unit. French pocket with two separate bags: pieces, front piece. French pocket with one piece bag. Welt pocket.

French pocket with two separate bags [edit]

Technical drawing of the unit


Input data of the style

  • width of the pocket opening = 5,0 cm (1-2)
  • length of the pocket along the side seam = 15,0 cm (1-3)
  • length of the bag along the side seam = 17,0 cm (1-4)
  • width of the top bag = 10,0 cm (2-5)
  • depth of the bag = 28,0 cm (6-7)
  • slope of the top bag = 3,0 cm (8-9)
  • overlapping of the facing = 4,0 cm (2-10)

Draw pocket opening

Add seam allowance

Draw the pocket opening,

Input the length of the bag along the side seam and depth of the bag

Shape the bottom contour of the bag

Draw pocket bags

Draw the top bag with

Input the width of the top bag and the slope of the top bag,

Draw the facing with input the overlapping of the facing


Trace the pieces


 

 

Add seam allowance

Create mirror corner of the top bag

Adjust the top bag: flip and realign the grain line

Adjust the front piece


Complete the production patterns

Add notches

Define angled notches

 

  

French pocket with one piece bag [edit]

Technical drawing of the unit 2


Input data of the style 2

  • width of the pocket opening = 5,0 cm (1-2)

  • length of the pocket along the side seam = 15,0 cm (1-3)

  • length of the bag along the side seam = 20,0 cm (1-4)

  • width of the top bag = 10,0 cm (2-5)

  • depth of the bag = 28,0 cm (6-7)

  • overlapping of the facing = 4,0 cm (2-8)

Draw pocket opening 2

Add seam allowance
Draw the pocket opening
Input the length of the bag along the side seam and depth of the bag
Shape the bottom contour of the bag
Draw the facing with input the overlapping of the facing

Trace the pieces 2

Add seam allowance 2

Adjust the top bag: mirror and replace the contour line with the line of pocket opening for the top part of the bag.



Complete the production patterns 2

Add notches, define angled notches:


Welt pocket [edit]

Technical drawing of the unit 3

Single welt pocket with a flap



Input data of the style 3

  • length of the pocket opening = 11,0 cm
  • depth of the bag = 13,0 cm
  • width of the welt= 1,0 cm
  • width of the flap in the ends= 3,0 cm
  • width of the flap in the middle= 4,0 cm

Draw pocket bags 3

Temporary close the dart

Add seam allowance

Offset the waist line

Define the place of the pocket,

adjust the length of the pocket opening

Draw the pocket bags and the pocket flap

Trace the pieces 3


Complete the production patterns 3

Rotate the bags

Realign the grain line of the bags

Create the welt as rectangle

Create the welt a mirror piece

Add seam allowance to the pieces

Create regular corners

Create notches


 

 


Rotate the dart back to waist line

Fold the dart